Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Heater Radiator from a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Heater core

Video tutorial

In this guide, you will see the steps that will allow you to remove and replace the heater radiator of the Peugeot 206. First, open the bonnet of your car and begin disconnecting the coolant pipe, which is located at the top of the engine bay; let the fluid drain into a container.

Next, get into the vehicle on the driver's side and remove the plastic cover located at the bottom next to the pedal area, thus accessing the heater radiator; then disconnect the pipe and unscrew the bracket screws to remove and replace the entire matrix!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Heater Radiator of the Peugeot 206
How to Remove the Cabin Heater Radiator of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's briefly look at the instructions that will allow you to remove and replace the cabin heater radiator of the Peugeot 206. First, get inside the …
How to Remove the Heating Radiator from a Peugeot 206
How to Remove the Heating Radiator from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, learn how to remove the heating radiator from a Peugeot 206. First, disconnect the battery terminals. Move to the engine bay: remove t…
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) The main instructions in this guide will show you how to disassemble and replace the cooling radiator of the Peugeot 206 1.4 engine. First, open the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos