Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Antifreeze coolant

In this tutorial, you will learn how to replace the coolant in a Peugeot 206. Before proceeding, wait for the engine to cool completely; otherwise, you will be working with boiling liquid and risk serious burns. Once assured of this, lift the front of the car, open the bonnet, and remove the cap from the expansion tank. Next, remove the airbox, disconnect the lower radiator hose, drain the liquid completely, and open the two indicated valves. At this point, reconnect the hose, insert the new coolant, and when it starts to flow from the valves without bubbles, tighten them.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Peugeot 206
How to Replace the Thermostat on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Learn how to replace the thermostat on a Peugeot 206. Lift the front bonnet of the car and locate the hose connected to the radiator that needs to be…
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Guide to Replacing the Cooling Radiator on a Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) The main instructions in this guide will show you how to disassemble and replace the cooling radiator of the Peugeot 206 1.4 engine. First, open the …
Guide to Removing the Heater Radiator from a Peugeot 206
Guide to Removing the Heater Radiator from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this guide, you will see the steps that will allow you to remove and replace the heater radiator of the Peugeot 206. First, open the bonnet of you…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos