Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery of a Mercedes C-Class Key Fob

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Key

See other generations:
Video tutorial

Are you replacing the battery of a Mercedes C-Class key fob? Here's how to do it: Take your key fob and slide the button to release the metal key. Once the key is out, use a lever to pry the battery holder from the cover (as shown in the video). Remove the battery from the compartment (use a small screwdriver), take a new one of the same size and voltage.

Reinstall the plastic battery holder into the key fob cover, and finally insert the metal key back into the cover. Check that the key fob works correctly.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. Replacing the battery and cover of a Mercedes C-Class key fob? Here's how to do it: Take your key fob and slide the button to release the metal key... …
Mercedes Classe C (2014-2021 / W205) In this video tutorial, you will learn how to disassemble the key fob to replace the battery for a 2019-2020 Mercedes C-Class. First, extract the key…
Mercedes Classe C (2014-2021 / W205) In this video tutorial, you will learn how to reset the low battery warning message for the remote key on a Mercedes C-Class W205 by replacing the re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos