|
Do it yourself
| |||
| ||||
Fiat Punto interior fan resistor replacement
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
Work on the front passenger side, under the dashboard. Remove the plastic and locate the fan. Unscrew the three relative screws, one is not very visible and is located under the fan itself. At this point, release the resistance and make sure it is not hot (if you have used a car). It is fixed by a plug and a screw, so you just need to unscrew that screw and extract it by pushing the lever and pulling the connector. Insert the new resistance and screw. Place it in its small compartment. Put the fan back in its seat and tighten the three relative screws. Close the plastic under the glove box and that's it.
Posted on 17 June 2021 by ScegliAuto
This video is currently unavailable
Related tutorials
Fiat Punto
(1999-2011 /
MK 2, 188)
Where is the resistor of the fan of a Fiat Punto located? Let's see in this video how to do the disassembly. Remove with a lever the plastic placed u…
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
How to replace the fan resistor on a Fiat Grande Punto? Here’s how to carry out the replacement. Use a lever to remove the plastic under the front wi…
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
Do we want to remove the heating fan resistor on a Fiat Grande Punto? Let's see the disassembly of the fan resistor. We remove the plastic cover from…
Other guides you may be interested in
|
How to Replace the Cabin Filter in a Peugeot 207
How do you replace the cabin filter (pollen filter) located in a Peugeot 207? Follow these steps to remove the filter from its dedicated housing: use a screwdriver to unscrew the screws of the plastic cover located under the front windscreen, then remove the filter cover using a lever (where the air filter is located). Use a screwdriver to remove the cap from the filter housing and extract the cabin filter. Insert a new filter ensuring it fits snugly around the walls of the box. Finally, reattach the filter box cap and tighten the screws. Close the engine bonnet after assembly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
