Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Disassembly of the front seat Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Seat
Operation: Disassembly of the front seat Fiat Grande Punto

Today we will see how to remove the front passenger seat of a Fiat Grande Punto and Punto Evo. First we get on board the car and remove the plastic plate, which we find at the bottom of the floor, using a flat screwdriver; then we are going to disconnect the electrical connector that we find below, by pressing on the tab. At this point we are going to unscrew the seat fixing screws that we find on the sliding guides, using a T30 torx wrench; we just have to remove the seat, as shown in the video: apply the reverse procedure for reassembly!


Posted on 18 February 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Punto 2005-2018 - Why doesn't the seat of the Fiat Punto slide? Read Answer
    • Punto 1999-2011 - What to do if the seat belt gets stuck in the Fiat Punto? Read Answer
    • Punto 1999-2011 - How to adjust the driver's seat on Fiat Punto street? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos