Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Air Vents on Fiat Punto 188

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Air vents

Removing the air vents on a Fiat Punto 188 (second series) is really straightforward. To do this, insert a small flat screwdriver into the gap of the vent frame and lever it out to detach it from its housing. Perform this operation carefully, working around the entire gap of the vent. If you are concerned about scratching the area, use a plastic wedge instead. Similarly, to fit new vents, simply insert them into the housing until they are securely in place. It's that easy!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on Fiat Punto 188
Replacing the Cabin Air Filter on Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, learn how to remove and replace the cabin air filter on a Fiat Punto 188. The removal process is very simple and does not req…
How to Remove the Air Vents of the Fiat Punto
How to Remove the Air Vents of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial video, see how to remove the air vents of the Fiat Punto by following a few simple steps that will guide you towards proper manageme…
Removing the Dashboard of a Fiat Punto
Removing the Dashboard of a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Today, this video tutorial will show you how to remove the dashboard of a first-generation Fiat Punto. First, get inside the vehicle and remove the s…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos