Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Mirror on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

In this new tutorial video, see how to replace the external rear-view mirror on a Fiat Punto. To save money, you can source the mirror from a used parts dealer, where you might find an original part made from more durable material than a non-original one. First, get a flathead screwdriver and a crosshead screwdriver; open the door and remove the tab from the inner cover of the mirror as shown in the video.

Then, use the screwdriver to unscrew the internal screw; also remove the cover of the control knob for adjusting the mirror and unscrew the screw by hand. At this point, remove the plastic cover.

Now, unscrew the internal plastic washer and remove the mirror. Fit the new mirror you purchased by reversing the steps.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror on the Fiat Punto
Replacing the External Wing Mirror on the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you how to remove and replace the external wing mirror on the Fiat Punto. First, move to the outside and start unscrew…
How to Replace the External Wing Mirror on a Fiat Punto
How to Replace the External Wing Mirror on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today, you will learn how to remove and replace the external wing mirror on a Fiat Punto. First, open the front door and start by removing the triang…
How to Remove the External Mirror of a Fiat Grande Punto
How to Remove the External Mirror of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow these steps to remove the external mirror of a Fiat Grande Punto. Use a lever (plastic or rubber) to pry between the perimeter of the mirror h…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos