Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the external rear view mirror of the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Outside rearview mirror
Operation: How to replace the external rear view mirror of the Fiat Punto

Today we will see how to disassemble and replace the external rear view mirror of the Fiat Punto. First we open the front door and start disassembling and removing the triangular plastic cover, where the small speaker is located; then disconnect the electrical connector and unscrew the central nut of the mirror, as shown in the video. Now we remove the rear view mirror from the outside, replacing it with the new one; then we install the new rear view mirror, applying the reverse procedure of disassembly!


Posted on 30 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the right rearview mirror of the Fiat Punto cost? Read Answer
    • Punto 2005-2018 - How much do the rear-view mirrors of the Fiat Punto Evo cost? Read Answer
    • Punto 2005-2018 - What is the fuse of the exterior mirrors on Fiat Grande Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos