Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Mirror Cap of a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Start by folding the mirror in question towards the window. Next, remove the glass mirror by pulling it from its housing, as it is clipped in place, then disconnect the connector attached to it. This will expose the clips that secure the mirror cap. Using a flathead screwdriver, press the clips and insert the screwdriver tip into the gap between the cap and the mirror itself to lever it off. This will successfully remove the mirror cap.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Remove the Mirror Glass on Fiat Grande Punto
How to Remove the Mirror Glass on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the mirror glass on a Fiat Grande Punto? Follow these steps: using a plastic or rubber-coated spatula, carefully pry between the perime…
How to Replace the Coloured Plastic on the Wing Mirror of a Fiat Grande Punto
How to Replace the Coloured Plastic on the Wing Mirror of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How do you replace the coloured plastic on the exterior wing mirror of a Fiat Grande Punto? Follow this guide. Using a plastic or rubber lever, pry b…
How to Remove the External Mirror of a Fiat Grande Punto
How to Remove the External Mirror of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow these steps to remove the external mirror of a Fiat Grande Punto. Use a lever (plastic or rubber) to pry between the perimeter of the mirror h…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos