Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Wiper Motor on a Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Windshield wipers

In this tutorial, you will see how to remove the windscreen wiper motor on a Fiat Ducato van. First, remove the headlight cover on the driver's side. Next, unscrew the screws securing the plastic plate of the windscreen, disconnect the rainwater drain tube, remove the wiper arms, and take out the plate. At this point, disconnect the motor connector and unscrew the support bolts for the linkages and the motor itself. Once the entire unit is extracted, you can unscrew the 4 screws securing the motor, fit the replacement, and reassemble everything by following the reverse procedure.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Motor on a Fiat 500?
How to Replace the Wiper Motor on a Fiat 500?
Fiat Ducato (2006-2014 / X250) To replace the wiper motor on a Fiat 500, secure the wipers so they do not obstruct the removal of the motor. To do this, open the bonnet and loosen …
Where is the Windscreen Wiper Fuse in the Fiat Ducato Van?
Where is the Windscreen Wiper Fuse in the Fiat Ducato Van?
Fiat Ducato (2014-2026 / X290) If the windscreen wipers in the Fiat Ducato van are not functioning, first check the status of the respective fuse, which is located as shown in this…
Where to Find the Fuses in a Fiat Ducato
Where to Find the Fuses in a Fiat Ducato
Fiat Ducato (2014-2026 / X290) The operation of the devices installed in the Fiat Ducato is regulated by fuses located within the appropriate fuse boxes present in the vehicle: in …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos