Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight of a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

The video shows how to replace an H7 bulb in a 2016 Fiat Ducato. This is a task that can be done without going to a mechanic and takes just a few minutes.

First, lift the bonnet and secure it with the prop. Then, unscrew the central Torx screw that is 30 millimetres.

Using a 14 mm socket spanner, unscrew the screw at the top. Use a wedge to lever the headlight towards the centre to extract it. Disconnect the connector from the headlight. Remove the cover and replace the blown bulb.

Carry out the reassembly in the reverse order of disassembly.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Fiat Ducato
How to replace the headlight bulb of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) If you want to replace a headlight bulb of your latest model Fiat Ducato, simply follow the procedure described in our new guide. First, purchase a n…
How to replace the front headlight bulb of the Fiat Ducato X 250
How to replace the front headlight bulb of the Fiat Ducato X 250
Fiat Ducato (2006-2014 / X250) To replace the right front headlight bulb of the Fiat Ducato model x 250, we need to open the front hood and then unscrew the screws located next to …
How to Replace the Dipped Beam Bulb on Fiat Ducato
How to Replace the Dipped Beam Bulb on Fiat Ducato
Fiat Ducato (2014-2026 / X290) How to replace the bulb on a Fiat Ducato? Start by lifting the front bonnet, locate the back of the headlamp, and remove the plastic cover cap. If yo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos