Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to repair the soft top guides on Fiat Cinquecento Cabrio

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Soft top
Operation: How to repair the soft top guides on Fiat Cinquecento Cabrio

In today's video we will see how to repair the hood guides on the convertible version of the Fiat 500C, following the instructions below. First of all we go to lower our hood and remove the screws that we find on the back, removing the illustrated plastic clips (i.e. the limit switches); then we go to remove the guides of our hood, going to remove the upper uprights (unscrewing all the fixing screws). We then proceed with the repair or replacement of the guides, following the video tutorial to the end to better understand the steps!


Posted on 2 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why doesn't the Fiat 500's sunroof open? Read Answer
    • 500 2007-2022 - Where is the electric motor on the Fiat 500 hood located? Read Answer
    • 500 2007-2022 - Where can you buy the Fiat 500 C soft top repair kit? Read Answer
    • 500 2007-2022 - Why does the Fiat 500 roof struggle to open? Read Answer
    • 500 2007-2022 - How much does it cost to repair the Fiat 500C soft top? Read Answer
    • 500 2007-2022 - What problems can the Fiat 500c soft top present? Read Answer
    • 500 2007-2021 - What problems can the Fiat 500 sunroof present? Read Answer
    • 500 2007-2021 - How much does it cost to replace the soft top in the Fiat 500C? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos