Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove and replace the rear light of the Fiat 500 Abarth

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Tail light
Operation: How to remove and replace the rear light of the Fiat 500 Abarth

In today's video tutorial we will see how to remove and replace the rear light of the Fiat 500 Abarth, following the instructions below. First of all we open the tailgate of the boot and start by unscrewing the fixing screws that we find on the side of the light; after which we remove the latter by disconnecting the electrical connector of the bulbs. At this point we replace the headlight with the new one (in this case the new headlight of the Fiat 500 restyled version is mounted); we just have to connect the bulbs and fix the light with the side screws!


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos