Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the rear light on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Tail light
Operation: How to remove the rear light on Fiat 500

How to remove the rear light of your Fiat to replace the bulbs? Let's see how to proceed: open the rear door and with a screwdriver or screwdriver unscrew (with a socket wrench or screwdriver with insert) the screws that tighten it (located on the side of the rear light); as soon as the headlight is free from any constraints, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace damaged bulbs with pieces of the same size and voltage. Finally we go to reassemble the lighthouse and proceed backwards in the assembly. We test the correct functioning of the lights. - Screwdriver - Cordless screwdriver - Inserts - Plastic lever.


Posted on 29 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos