Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removing the rear light on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Tail light
Operation: Removing the rear light on Fiat 500

Is the Fiat 500 headlight broken? Let's see how to remove the rear light. Lift the luggage compartment door, unscrew the tightening screws on the side of the headlight with a screwdriver. We detach the rear light from its housing once all the screws have been removed, disconnect the electrical terminals. We disassemble the damaged bulbs and mount them on the new headlight (same size and voltage). We connect the power supply terminals to the afro and then fix it above the bodywork. We test the correct functioning of the rear lights with the control levers placed in the passenger compartment.


Posted on 19 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos