Do it yourself
Frequently asked questions about cars and motorcycles

Removing and Replacing the Rear Light of the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light

This guide will show you how to remove and replace the rear light of the Fiat 500 Abarth. First, open the boot lid and start unscrewing the fixing screws located on the rear light using a socket spanner. Disconnect the bulb's electrical connector located behind the light to remove it, as illustrated in the video. Now, install the new rear light, connecting the electrical wiring; similarly, replace the other light, checking the operation of the stop lights!

Posted on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2022 / 312) In today's tutorial video, you will find the instructions to remove and replace the rear lights with those from the facelift version of the Fiat 500 …
Fiat 500 (2012-2023 / 500 L) How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of…
Fiat 500 (2007-2021 / 312) In today's video, you will see the steps to dismantle the instrument cluster of a Fiat 500 and 500 Abarth. First, get inside the car and start by rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos