Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light on a Fiat 500 Abarth

Model: Fiat 500 500 L - Years 2012-2023
Part: Tail light

How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of the light with a screwdriver, detach the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Fit the new light with the securing screws: connect the power connectors before mounting the rear light. Test the correct operation of the front and rear lights.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Rear Light of the Fiat 500 Abarth
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's video tutorial, you will learn how to remove and replace the rear light of the Fiat 500 Abarth, following the instructions below. First, o…
Removing and Replacing the Rear Light of the Fiat 500 Abarth
Removing and Replacing the Rear Light of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) This guide will show you how to remove and replace the rear light of the Fiat 500 Abarth. First, open the boot lid and start unscrewing the fixing sc…
How to Replace the Rear Lights on the Fiat 500 Abarth
How to Replace the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial, you will see how to remove and replace the original rear lights with those from the facelift version on the Fiat 500, includi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos