Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

How do you remove the car's rear light? Let's look at removing the rear light on a Fiat 500. Open the boot lid, unscrew the retaining screws located at the side of the light (right side) with a screwdriver. Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage).

Connect the power connectors to the new light, then screw in the retaining screws. Test the correct operation of the previously fitted bulbs by operating the control levers.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Changing the Front Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to change the front headlight bulbs on a Fiat 500? Follow these steps for the replacement. Open the bonnet by pulling the lever located a…
How to Change the Front Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to change the front headlight bulbs on a Fiat 500? Let's see how to proceed in this guide video. Open the bonnet by pulling the lever loc…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos