Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator on a Fiat Panda 169?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Checks and maintenance

To replace the window regulator on a Fiat Panda 169, use a lever to lift the plastic covers that hide the screws securing the door panel. These covers are located to the right and left of the internal handle: once these screws are removed, you can pry off the panel completely. To remove it entirely, you will also need to disconnect the relevant connectors and the handle cable. At this point, detach the inner fabric and loosen the screws of the window regulator, keeping the glass secured with a screwdriver. The window regulator can then be extracted and disconnected, allowing for its replacement.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the window regulator on the Fiat Panda 169
How to install the window regulator on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This guide shows how to replace the electric window regulator on the Fiat Panda 169. First, remove the inner door panel and the speaker. Detach the s…
How to Remove the Window Regulator Motor from a Fiat Panda
How to Remove the Window Regulator Motor from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the window regulator motor from a Fiat Panda and don't know how to do it? Let's see how to proceed in this video: disconnect the batter…
How to Remove the Window Crank Handle of a Fiat Panda
How to Remove the Window Crank Handle of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the rear door of your Fiat Panda. Begin by inserting the tip of a flat screwdriver into the gap between the window crank h…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos