Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Barrel on the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014

In this video, we will go through the main steps to remove the ignition barrel or switch on the Fiat Ducato third series, following the instructions below. First, get inside the vehicle and start by removing the cover or plastic shroud around the steering wheel; then disconnect the various ignition electrical connectors, as illustrated in the video. At this point, you must remove the fixing pin of the barrel by tapping with a punch; once the two pins are removed, you can extract and replace the ignition barrel!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
How to Remove the Airbag from a Fiat Ducato
How to Remove the Airbag from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you start, to work safely, disconnect the battery of your Fiat Ducato. Begin by sitting in the driver's seat. Next, unscrew and remove the scr…
How to Reset the "Service" Light on a Fiat Ducato
How to Reset the "Service" Light on a Fiat Ducato
Fiat Ducato (2002-2006 / ) Before starting, sit in the driver's seat of your Fiat Ducato. Begin by activating the instrument panel by turning the key in the ignition. Next, pre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos