Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement of the rear lights of the Fiat 500 Abarth

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Tail light
Operation: Replacement of the rear lights of the Fiat 500 Abarth

In today's video tutorial we will see the instructions that will allow us to remove and replace the rear lights with those of the restyled version of the Fiat 500 Abarth. First of all we open the tailgate and begin to unscrew the fixing screws of the rear light, which we find on the sides of the same; disconnect the electrical connector of the bulbs and modify the central plastic cover and the lamp holders of the lights, as shown in the video. At this point we are going to install the new rear lights, making the connection, following the video to the end!


Posted on 12 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos