Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker from the Door of a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Speaker

See other generations:
Video tutorial

If you want to tackle the replacement of the speaker located in the front doors of the car, refer to the instructions below and use the images from the video. Get a small screwdriver to lever and detach the clips securing the perforated plastic panel above the speaker.

Underneath, you will find the speaker secured to the door with screws. Proceed to remove these three screws, allowing you to extract the speaker after disconnecting the connector behind it. Then take the new speaker, position it in the housing, reconnect the connector, and refit the support screws.

Finally, reattach the perforated plastic panel, and the job will be complete.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Remove the Door Speaker on a Fiat Punto
How to Remove the Door Speaker on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To remove the speaker on a Punto, follow these simple steps. Remove the plastic grille covering the speaker: detach it by hand from the door panel. U…
How to Replace the Speakers in a Fiat Punto
How to Replace the Speakers in a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How do you remove the speakers located in the door panel of a Fiat Punto? Before starting the disassembly, disconnect the battery terminals located i…
Removing the Speaker from a Fiat Grande Punto
Removing the Speaker from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to replace the speakers in your Grande Punto? Let's go through the disassembly and assembly process. To replace the car speaker, you need to rem…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos