Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on the Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Diesel fuel filter

See other generations:
Video tutorial

To replace the diesel filter on the Fiat Punto Evo, start by opening the bonnet, spray some cleaner, and then remove it with compressed air; take special pliers and disconnect the two clips from the diesel pipes; using a 10 mm socket, unscrew the bolt that secures the diesel filter, remove it, and disconnect the connector.

Once the filter is disconnected, unscrew the cap where the connector is, allowing the diesel to drain into a container, remove the old sealing ring from the cap; place the new sealing ring on the old cap and screw it onto the new filter; now reconnect the connector to the filter and secure it to the bracket by tightening the bolt with a 10 mm socket; finally, reconnect the pipes to the new filter and the operation is complete.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet
How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see how to remove and replace the diesel filter on a Fiat Punto Evo 1.3 MultiJet, as well as on the Grande Punto. First, open…
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. F…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos