Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Diesel fuel filter

In this video, you will see how to remove and replace the diesel filter on a Fiat Punto Evo 1.3 MultiJet, as well as on the Grande Punto. First, open the bonnet and locate the diesel filter, which is found at the top left; then disconnect the two diesel pipes, and remove the electrical connector, as shown in the video. At this point, unscrew the nuts of the mounting bracket located on the sides using a 10 mm socket spanner; now you can remove the diesel filter cartridge, replacing it with a new one (with the original spare part).

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. F…
How to Replace the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
How to Replace the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. First, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos