Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. First, open the bonnet and locate the diesel filter, which is found at the top left of the engine. Next, disconnect the fuel pipes and the electrical connector located underneath, as shown in the video.

Now, loosen the bracket to remove and replace the filter with a new one, using the original part. Finally, reassemble everything, following the video to the end!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Fiat Punto 1.3 MultiJet?
How to Replace the Diesel Filter on a Fiat Punto 1.3 MultiJet?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This tutorial shows how to replace the diesel filter on a Fiat Punto 1.3 MultiJet, a very simple and quick operation. First, ensure the engine is com…
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will learn how to remove and replace the glow plugs on the Fiat Punto 1.3 Multijet, as well as on the Grande Punto and…
How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
How to Change the Engine Oil and Oil Filter of the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the procedure for replacing the engine oil and oil filter while performing the regular maintenance service for the Fiat Punto Evo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos