Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on the Fiat Cinquecento?

Model: Fiat Cinquecento MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Clutch

Video tutorial

To replace the clutch cable on the Fiat Cinquecento, lift the car using a ramp and access its underlying components. Here, you will locate the clutch cable, which can be removed simply by disconnecting its two ends.

To do this, use the appropriate spanners to loosen the bolts. Once the ends are loosened, the cable can be slid out and replaced with a new spare part.

The new cable should then be connected to both ends, ensuring that the clutch operates correctly.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to replace the external door handle of the Fiat Cinquecento
How to replace the external door handle of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Cinquecento. First…
How to Remove the Instrument Cluster in a Fiat Cinquecento
How to Remove the Instrument Cluster in a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the instrument cluster in a Fiat Cinquecento? Follow these steps for proper removal. Remove the plastic cover (trim) of the instrument …
Removing the External Wing Mirror of the Fiat Cinquecento
Removing the External Wing Mirror of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First,…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos