Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Headlights on a Fiat Panda?

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Headlight

This video demonstrates how to adjust the front headlights on a Fiat Panda. For this task, you will need an 8mm spanner to loosen and tighten the adjustment screws. Position the car in front of a white wall, as shown in the video, and use a pencil to mark the intersection points of the horizontal and diagonal beams. From the marked points, drop down 18cm and mark two more points, then reverse the car 10m and adjust the headlights to align the intersection points with the newly marked spots. It is advisable to perform this operation at night for better visibility of the light beams.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Dipped Headlights on a Fiat Panda 169
How to Adjust the Dipped Headlights on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will learn how to adjust the height or angle of the dipped headlights on a Fiat Panda 169. You can make the adjustment in two d…
How to Adjust and Clean the Windscreen Washer Nozzles on the Fiat Panda
How to Adjust and Clean the Windscreen Washer Nozzles on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below are the instructions to adjust and clean the windscreen washer nozzles on the Fiat Panda, in simple steps. First, open the bonnet of your car a…
How to adjust the clock on the instrument panel of the Fiat Panda
How to adjust the clock on the instrument panel of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Adjusting the time on the instrument panel of the Fiat Panda, a model produced from 2003 to 2012, is a simple and quick operation to be carried out i…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos