Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to reset the partial odometer of the Fiat 500L

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: -board computer
Operation: How to reset the partial odometer of the Fiat 500L

The trip meter is very important as it allows you to have an accurate count of the kilometers traveled in a certain period of time. In this way it is possible to have a precise estimate, for example, of the liters of fuel used in a road section or simply its length. To reset this value it is necessary to locate the small button located at the far right of the wiper lever. Once found, simply hold it down for a few seconds and on the on-board computer you will notice that the value has been reset. This operation can be repeated as many times as you want without any kind of problem.


Posted on 12 July 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Why doesn't the Start&Stop system of the Fiat 500 work? Read Answer
    • 500 2007-2022 - How much does the Uconnect system cost for the Fiat 500? Read Answer
    • 500 2014-2022 - What to do if the touch screen of the Fiat 500 freezes? Read Answer
    • 500 2007-2023 - Why does the message "START&STOP not available" appear on the Fiat 500 display? Read Answer
    • 500 2007-2022 - Where can you see the indicators of the Fiat 500 Hybrid? Read Answer
    • 500 2014-2022 - What do the different colored lights on the Fiat 500 mean? Read Answer
    • 500 2014-2022 - Alarm "Start and Stop not available, have the engine checked on 500L cars. What could it depend on? Read Answer
    • 500 2014-2022 - Why doesn't the Start&Stop system on the Fiat 500X work? Read Answer
    • 500 2007-2022 - What does the check engine light on Fiat 500 signal? Read Answer
    • 500 2014-2022 - How to reset the Service light on Fiat 500x 2018? Read Answer
    • 500 2007-2022 - Why doesn't the central display of the Fiat 500 work? Read Answer
    • 500 2007-2022 - Why doesn't the Start&Stop system on the Fiat 500 work? Read Answer
    • 500 2007-2022 - Tire pressure monitoring not available on the Fiat 500? Read Answer
    • 500 2007-2022 - How is bluetooth activated in the FIAT 500? Read Answer
    • 500 2007-2022 - What are the error codes of a car? Read Answer
    • 500 2007-2022 - What does the orange warning light with a triangle and an exclamation point indicate in the Fiat 500? Read Answer
    • 500 2014-2022 - What does the Start and Stop system warning light indicate on Fiat 500X? Read Answer
    • 500 2012-2023 - What does the "Start / Stop not available" message mean in the Fiat 500L? Read Answer
    • 500 2007-2021 - Start and stop warning light on on the Fiat 500, what does this mean? Read Answer
    • 500 2007-2022 - Why does the Fiat 500 display no longer light up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos