Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Control Battery on a Fiat Strada?

Model: Fiat Strada MK 1 - Years 1998-2021
Part: Key

As you can see in this tutorial, replacing the remote control battery on a Fiat Strada is an extremely simple and cost-effective task. To do this, you will need a small flat-head screwdriver and a replacement CR2032 battery. First, locate the slot on the back of the remote control, then insert the screwdriver into it and, applying force, unlock the two halves. Once done, remove the internal module, open it, and proceed with replacing the battery, ensuring the replacement is positioned the right way.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Fiat Strada?
How to Replace the Remote Battery of the Fiat Strada?
Fiat Strada (1998-2021 / MK 1) In this tutorial, you will see how to replace the remote battery of the Fiat Strada. For this simple and quick operation, you will need a replacement…
How to Replace the Front Headlight Fuse on a Fiat Strada
How to Replace the Front Headlight Fuse on a Fiat Strada
Fiat Strada (1998-2021 / MK 1) The front headlight on a Fiat Strada may not work for three main reasons: a faulty connector, a blown bulb, or a blown fuse. Once diagnosed with a co…
How to Replace the Front Shock Absorber on the Fiat Strada?
How to Replace the Front Shock Absorber on the Fiat Strada?
Fiat Strada (1998-2021 / MK 1) To replace the front shock absorber on the Fiat Strada, open the bonnet to access the screws that secure it from the top. These can now be loosened, …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos