Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Service warning light

In today's video, you will see how to reset the service light on a Fiat Tipo not in the most conventional way, by intervening on the onboard computer, but by using a diagnostic tool connected to the OBD port. Specifically, you will operate through the phone application that controls this device. Turn on the ignition and connect the tool to the OBD port of the car (located under the fog light controls). Now enter the menu and first select the brand, then the model and type of engine control unit. Once done, you can select the option to clear all errors.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Fiat Tipo
How to Reset the Maintenance Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) This short and simple guide will show you how to reset the maintenance light on the Fiat Tipo. First, get into the vehicle and connect your diagnosti…
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…
How to reset the Service light on the Fiat Tipo?
How to reset the Service light on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) The Service light reset on the Fiat Tipo cannot be performed using the appropriate commands within the onboard computer: to execute the reset, a diag…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos