Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you can see how to reset the service light on a Fiat Tipo: first, turn the key to switch on the ignition, press the accelerator pedal fully, and simultaneously press the brake pedal seven times. After performing this operation, wait for one minute for the software to reset the system; during this time, continue to hold the accelerator pedal down.

At the end of the minute, release the pedal and turn off the ignition. Before turning the ignition back on, wait for another minute, after which you can turn the ignition back on and the oil change light will have disappeared.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on the Fiat Tipo
How to Reset the Maintenance Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) This short and simple guide will show you how to reset the maintenance light on the Fiat Tipo. First, get into the vehicle and connect your diagnosti…
How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To reset the Service light on a Fiat Tipo, you must first change the oil and the corresponding filter as indicated in the tutorial. Next, enter the c…
Resetting the Tyre Pressure Warning Light on a Fiat Tipo
Resetting the Tyre Pressure Warning Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this guide, we will see the instructions that will allow us to reset the tyre pressure warning light on the Fiat Tipo; before performing the reset…

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to reset the Uconnect system in the Fiat Tipo? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos