Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Service warning light

To reset the Service light on a Fiat Tipo, you must first change the oil and the corresponding filter as indicated in the tutorial. Next, enter the cabin and turn on the ignition: if the Service light appears again when starting, it means you need to add more oil to the reservoir. Repeat this process until the light turns off automatically when you switch on the ignition; after the reset, you can turn off the ignition by turning the key.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) When the Service light illuminates on the Fiat Tipo display, it indicates that the scheduled service period has been exceeded. The light cannot be re…
How to reset the Service light on the Fiat Tipo?
How to reset the Service light on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) The Service light reset on the Fiat Tipo cannot be performed using the appropriate commands within the onboard computer: to execute the reset, a diag…
How to Reset the Service Light on the Fiat Tipo
How to Reset the Service Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this short video, see how to reset the service light for routine maintenance of the oil change on the Fiat Tipo, as well as on all other vehicles …

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos