Do it yourself
| ||||
|
Fiat Tipo - Video tutorial
Model: Fiat Tipo
358, 356, 357
- Years 2016-2023 When the Service warning light comes on on the Fiat Tipo display, it means that the period useful for carrying out the scheduled service has been exceeded. The warning light cannot be reset manually as is the case with many other car models; in this case it will be necessary to connect a scanner to the OBD socket. The OBD socket in the Fiat Tipo is located under the steering column, and is accessible by removing the plastic cover placed over the pedals. By inserting the plug into the OBD socket and connecting the scanner it will be possible to reset the warning light with the procedure shown in the video.
Posted on 9 May 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |