Do it yourself
| ||||
|
Fiat Tipo - Video tutorial
Model: Fiat Tipo
358, 357, 356
- Years 2016-2023 The operation of resetting the Service light on the Fiat Tipo cannot be done through the appropriate commands and by navigating within the onboard computer: in order to perform the reset, it is necessary to use a diagnostic tool. This must be connected to the OBD port located under the steering column: once the scanner has been connected, the model of the car in question and the corresponding version must be selected. Then, by following all the instructions shown in the tutorial, it will be possible to perform the reset of the Service light by turning off the instrument panel.
Posted on 17 April 2023 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |