Do it yourself
| ||||
|
Fiat Tipo - Video tutorial
Model: Fiat Tipo
358, 356, 357
- Years 2016-2023 To reset the Fiat Tipo Service warning light, you have to turn the ignition key so that the instrument panel can be turned on. You will need to move around the menu that will appear on the display using the arrows on the left spoke of the steering wheel, until you find the wrench icon. At this point it will be necessary to connect a diagnostic tool to the vehicle's OBD port and follow the reset instructions that are shown in the tutorial. Once the reset has been completed you can disconnect the scanner from the door and turn off the instrument cluster.
Posted on 28 August 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.074
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |