Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Below are the steps to reset the service light for the routine maintenance oil change on a Fiat Tipo. First, get in the vehicle and turn on the instrument cluster; then press and hold the accelerator pedal while simultaneously pressing the brake pedal five times, as shown in the video.

At this point, keep the accelerator pedal pressed for another thirty seconds, then turn off the cluster; next, start the engine and check that the service light has been reset!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To reset the service light on a Fiat Tipo, turn the ignition key to power on the instrument cluster. Navigate through the menu that appears on the di…
How do you reset the Service light of the Fiat Tipo?
How do you reset the Service light of the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To completely remove the Service light from the Fiat Tipo instrument panel, you will need to connect a diagnostic tool to the vehicle's OBD port: thi…
How to Reset the Service Light on the Fiat Tipo?
How to Reset the Service Light on the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To reset the Service light on the Fiat Tipo, press and hold the accelerator pedal while the instrument panel is off: continue holding it down, then i…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos