Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
Punto EVO, Grandepunto , MK 3, 199
- Years 2005-2018 In this guide we will find out how to replace the rear light bulbs of the Fiat Grande Punto without having to resort to the intervention of a specialized mechanic. First make sure you have activated the handbrake and turned off the engine so that you can carry out the entire operation in maximum safety. Then lift the rear hood and proceed with unscrewing the side screws that hold the headlight in place. Disconnect the connector and pull it out completely. At this point, in order to access the various bulbs present, it is necessary to remove the plastic protection by first unscrewing the two screws present. We remind you that the top bulb is for the arrows, the middle one is for the position lights and the last one for the brakes. Once the faulty bulb has been replaced, all that remains is to refit the protection, reposition the headlight correctly by connecting it to the connector and tighten the screws.
Posted on 29 August 2022 by ScegliAuto
Replace the rear fog light bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video tutorial we will see the steps on how to remove and replace the rear fog light bulb on the Fiat Grande Punto, but also on the Punto
Replacing the reversing light bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video tutorial we will see how to remove and replace the reverse light bulb on the Fiat Grande Punto, but also on the Punto Evo, in simple st
Replacement Fiat Punto - Grande Punto side indicator light
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see how to disassemble and replace the side indicator light bulb on a Fiat Punto and Grande Punto. First we are going to remove the old Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |