Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Radio from the Fiat Toro

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Car stereo

Today, you will see, in this brief and simple guide, the steps to remove the factory radio from the Fiat Toro. First, get inside the vehicle and start by removing the plastic cover around the radio; use a very thin plastic pry tool, as shown in the video. At this point, remove the screws securing the radio located on the sides, disconnect the electrical connectors at the back; if necessary, install the new radio by making the electrical connection, applying the reverse procedure of disassembly!

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Fiat Toro
How to Remove the Door Panel of the Fiat Toro
Fiat Toro (2016-2024 / MK 1) Follow these instructions to remove and replace the front door panel of the Fiat Toro in simple steps. First, open the front door and start removing …
How do you reset the Service light of the Fiat Toro?
How do you reset the Service light of the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Toro, you need to connect a diagnostic tool to the OBD port of the vehicl…
How do you reset the Service light of the Fiat Toro?
How do you reset the Service light of the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Toro, you need to insert the ignition key into the corresponding slot: yo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos