Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radio from the Fiat Toro

Model: Fiat Toro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

Video tutorial

Today, you will learn how to independently remove the radio from the Fiat Toro. The steps are simple and quick, taking only about half an hour of your time. The first step is to insert a plastic pry tool into the center panel of the radio to remove it. Once removed, disconnect the first connector related to the buttons.

The second step is to use a screwdriver to remove the four screws located on the sides of the screen. Once removed, you can pull out the radio.

The third step is to disconnect the three internal connectors and completely remove the radio.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

Fiat Toro (2016-2024 / MK 1) Today, you will see, in this brief and simple guide, the steps to remove the factory radio from the Fiat Toro. First, get inside the vehicle and star…
Fiat Toro (2016-2024 / MK 1) In today's video tutorial, you will see the instructions on how to remove and replace the center air vents of the Fiat Toro in simple steps. First, g…
Fiat Toro (2016-2024 / MK 1) In this guide, follow the steps to remove and replace the front suspension of the Fiat Toro. First, open the hood of your car and start by removing t…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos