Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Suspension of the Fiat Toro

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Suspension system

In this guide, follow the steps to remove and replace the front suspension of the Fiat Toro. First, open the hood of your car and start by removing the plastic cover located at the top of the engine compartment. Next, unscrew the three mounting bolts of the suspension, then disconnect it from below by removing all the pins, as shown in the video. Once the shock absorber is removed, compress the spring; then replace the suspension and reassemble everything, following the video until the end!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front fog lamp of the Fiat Toro
Replacement of the front fog lamp of the Fiat Toro
Fiat Toro (2016-2024 / MK 1) In this video tutorial we will see the steps that will allow us to disassemble and replace the front fog light bulb of the Fiat Toro. First of all, l…
How to Replace the Rear Shock Absorber on a Fiat Toro?
How to Replace the Rear Shock Absorber on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To replace the rear shock absorber on a Fiat Toro, lift the vehicle so you can remove the rear wheel corresponding to the shock absorber that needs r…
How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light on a Fiat Toro, turn on the instrument cluster by turning the ignition key in the ignition switch. Once the instrument clu…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos