Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : How do you replace the clutch on the Fiat Doblò?

Fiat Doblo - Video tutorial

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Clutch
Operation: How do you replace the clutch on the Fiat Doblò?

The replacement of the Fiat Doblò clutch is carried out by raising the vehicle, so that the bolts that secure the front wheels can be loosened. Once these have been removed, it will be possible to access the components placed inside, including the clutch housing itself. By unscrewing the appropriate screws, it will be possible to remove the casing so that the clutch inside it can be extracted. After the old clutch has been removed, it will be possible to insert a new one, subsequently fitting the relevant crankcase and all the components previously removed.


Posted on 19 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Doblo 2000-2009 - How much does the Fiat Doblo 223 clutch replacement kit cost? Read Answer
    • Doblo 2000-2009 - How much does the Fiat Doblo clutch kit cost? Read Answer
    • Doblo 2009-2021 - How much does the clutch kit cost for the Fiat Doblo '? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos