Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuse Box from the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuse box

In this video tutorial, you can see how to remove the fuse box from the Fiat Panda by following a few simple steps that will guide you towards proper vehicle management, working entirely independently. First, engage the handbrake and lift the bonnet; the fuse box is located near the battery. After removing the cover, you will need to unscrew the 10-millimetre bolt located at the side of the fuse box (as shown in the video). Now, use a flathead screwdriver to bend the plastic clip and then push the fuse box away. With pliers, take the blown fuse and replace it with one of the same amperage. Refit all parts in reverse order.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuses on Fiat Panda
Fuses on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's see how to remove the fuse box on a Fiat Panda. Lift the bonnet, locate the fuse box. Disconnect the cover next to the vehicle's battery and re…
Location of the Internal Fuse Box and OBD2 Port on Fiat Panda 2
Location of the Internal Fuse Box and OBD2 Port on Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, we will look at the location of the internal fuse box and the OBD2 port on the Fiat Panda 169, second generation. The interna…
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda, model mk2, has two fuse boxes and an OBD port inside. The first fuse box is installed inside the cabin behind a part of the dashboard…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - What is the Fiat Panda brake light fuse? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos