Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Position and Diagram for the Fiat Grande Punto - Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fuse box

In this short and simple guide, we will see the positioning and diagram of the fuses for the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet to locate the external fuse box; you will find it on the right by removing the plastic cover. The internal fuse box is located on the driver's side, by removing the plastic cover found to the left of the steering wheel; an additional fuse box can be found in the boot, by removing the lining on the left side. In the scrolling guide, we will see the fuse diagram, which associates each fuse with a code and its corresponding amperage!

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. fuses for the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet of the vehicle by pulling the lever located next to the pedals, and.. …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. diagram for the Fiat Grande Punto, as well as the Punto Evo. First, locate the internal fuse box; to access it, open the glove compartment and find the.. …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. port on a Fiat Grande Punto, as well as on the Punto Evo. To access the internal fuse box, first get inside the vehicle; then remove the plastic cover.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 1999-2011 - Where can I find the cigarette lighter fuse in FIAT Punto 188? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos