Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on the Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Service warning light

If the oil warning light on the instrument panel of your new Fiat 500 stays illuminated despite having recently changed the oil and filter, you need to perform a manual reset. This procedure allows you to restore the light without using professional tools. First, insert the key and turn on the ignition. Then, press the accelerator pedal fully three times in quick succession. Finally, wait a moment and turn off the ignition to complete the reset procedure.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on a Fiat 500
How to Reset the Oil Warning Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, check that the oil change and the general service on your Fiat 500 have been completed. Then, sit in the driver's seat and close al…
How to Reset the Engine Oil Warning Light on the Fiat 500 X
How to Reset the Engine Oil Warning Light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the maintenance warning light for the oil change on the Fiat 500 X. First, get inside the vehicle and conn…
How to Reset the "Service" Light on a Fiat 500
How to Reset the "Service" Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you can start, sit in the driver's seat of your Fiat 500. Begin by activating the instrument panel by turning the key in the ignition. Next, p…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos