Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the remote control of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years 2005-2018
Part: Key

In this video we will show you how to program the Fiat Grande Punto remote control. Take the new key with remote control and insert it into the control panel. Wait a few seconds after which you turn the key to start the engine. Once you have done this test, get out of the car and try to open and then close the doors from the outside. Do more than one test from both the outside and inside of the cabin to make sure the new key is programmed. Make a final test by starting the engine. If the key responds perfectly to all the commands, it means that the programming was successful.

Posted on 15 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to program the key of the Fiat Grande Punto
How to program the key of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the main instructions that will allow us to program the key of the Fiat Grande Punto, as well as the Punto Evo. In order to perform…
How do you program the key of the Fiat Punto?
How do you program the key of the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To program the key of the Fiat Punto, you need to insert the ignition key into the corresponding slot. Once the ignition is turned on, you can connec…
How do you program the key for the Fiat Punto?
How do you program the key for the Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In order to program the key of the Fiat Punto, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of …

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos