Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to programme the key for the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Key

Below are the main instructions that will allow you to programme the key for the Fiat Grande Punto, as well as the Punto Evo. To programme and code the key, you need to use specific programming software that already knows the code of the existing key (you will need the second key); then follow the procedure indicated by the tool to programme it, as shown in the video. At this point, test the functionality of the key by following the video tutorial to the end!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Fiat Punto?
How do you program the key of the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To program the key of the Fiat Punto, you need to insert the ignition key into the corresponding slot. Once the ignition is turned on, you can connec…
How do you program the key for the Fiat Punto?
How do you program the key for the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to program the key of the Fiat Punto, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of …
How to Program the Remote for the Fiat Grande Punto
How to Program the Remote for the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will learn how to program the remote for the Fiat Grande Punto. Take the new key with the remote and insert it into the ignition. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos