Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key for the Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Key

In order to program the key of the Fiat Punto, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of the vehicle, which is located at the bottom left of the steering column. Once the scanner is connected, you can select the model and version of the car, and follow the tutorial instructions to complete the programming procedure. After that, you can disconnect the scanner and test the key to ensure it is working properly.

Posted on 20 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the ECU on Fiat Punto 188
How to Reset the ECU on Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) The video shows us how to replace a faulty ECU with a new (or refurbished) one and how to reset/pair it with the vehicle using diagnostic software. T…
How do you program the key of the Fiat Punto?
How do you program the key of the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To program the key of the Fiat Punto, you need to insert the ignition key into the corresponding slot. Once the ignition is turned on, you can connec…
How to Disable the Seatbelt Chime with MultiECUscan on a Fiat Punto
How to Disable the Seatbelt Chime with MultiECUscan on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To disable the seatbelt chime using the MultiECUscan software on a Fiat Punto, start by connecting your computer to the car's OBD port. Open the main…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos