Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Key

To program the key for a Fiat Punto, insert the key into the ignition switch and turn it to position one. After this, connect a diagnostic tool to the OBD port of the vehicle, which is located at the bottom left of the steering column. Once the scanner is connected, select the car model and the corresponding version to follow the operations shown in the tutorial. At this point, you can disconnect the scanner, ensuring that the key has been correctly coded.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the ECU on Fiat Punto 188
How to Reset the ECU on Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) The video shows us how to replace a faulty ECU with a new (or refurbished) one and how to reset/pair it with the vehicle using diagnostic software. T…
How do you program the key of the Fiat Punto?
How do you program the key of the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To program the key of the Fiat Punto, you need to insert the ignition key into the corresponding slot. Once the ignition is turned on, you can connec…
How to Disable the Seatbelt Chime with MultiECUscan on a Fiat Punto
How to Disable the Seatbelt Chime with MultiECUscan on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To disable the seatbelt chime using the MultiECUscan software on a Fiat Punto, start by connecting your computer to the car's OBD port. Open the main…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos