Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the external rear view mirror of the Fiat Ducato

Fiat Ducato - Video tutorial

Model: Fiat Ducato X290 - Years 2014-2023
Part: Outside rearview mirror
Operation: How to remove the external rear view mirror of the Fiat Ducato

If we need to replace the external rear view mirror on this vehicle we can find the necessary information and indications on the video and on this description. Use a cross screwdriver to remove the screws on the internal door panel near the mirror, then use plastic levers to remove it completely. At this point we will have access to the mirror fixing screws which we are going to unscrew, then proceed to disconnect the electrical connection terminals and then proceed to remove the mirror. Take the new mirror and carry out the reassembly operations in reverse order.


Posted on 25 April 2023 by ScegliAuto



Replacing the wing mirror bulb on the Fiat Ducato
Fiat Ducato (2014-2023 / X290) In this guide, let's find out the steps that will allow us to disassemble and replace the indicator bulb of the external rear-view mirror of the Fiat
Removing the rear-view mirror Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Today we will see how to remove the exterior rearview mirror of a Fiat Ducato X250, following these simple instructions. Let's open the front door, f
How to change the wing mirror on the Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) In this guide, let's see how to disassemble and replace the external rear view mirror of the Fiat Ducato, following the instructions below. First of

    Frequently Asked Questions

    • Ducato 2006-2014 - What to do when the right mirror of the Fiat Ducato closes in the wind? Read Answer
    • Ducato 2006-2014 - How much does the exterior rear-view mirror of the Fiat Ducato cost? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos