Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlamp of a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

To remove the front headlamp of a Fiat Punto, first open the bonnet to access the screws securing the bumper at the top. Once these screws are loosened, you can unscrew those located inside the front wheel arches. After removing all these screws, the front bumper can be detached.

At this point, unscrew the bolts securing the headlamp in its housing; this will allow you to disconnect the connector at the back, to which you will then connect the new replacement part.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Removing the Front Headlight on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Remove the front headlight from a Fiat Punto. Open the bonnet and secure it with the prop rod; remove the front bumper (screws located in the wheel a…
How to Remove the Front Headlight of a Fiat Punto
How to Remove the Front Headlight of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide explains how to remove the front headlight of a Fiat Punto. Open the bonnet and secure it; remove the front bumper (screws located in the …
How to Replace the Front Headlamp Bulbs on a Fiat Punto
How to Replace the Front Headlamp Bulbs on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) How to replace the front headlamp bulbs on a Fiat Punto? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos